GMT Pallet For Brick Machine

GMT Pallet For Brick Machine

Introduction: GMT Pallet,the full name is Glass Mat Reinforced Thermoplastics,Itisakindofplasticbrickpallets,whichismadeoffiberglassasreinforcingmaterialandthermoplasticresin compositematerial,throug

Products Detail

Introduction:

 

GMT Pallet,the full name is Glass Mat Reinforced Thermoplastics,It is a kind of plastic brick pallets, which is made of fiber glass as reinforcing material and thermoplastic resin  composite material, through heating and pressurizing. The glass fiber is three-dimensionally staggered like steel, and the resin is coated with glass fiber like cement-coated steel.

The GMT raw material is a new type of engineering plastic, which was developed in the past few years. It can be recycled, so it is considered one of the most promising new green materials in the 21th century.Now, the materials are widely applied in automobile industry (such as bumper, motor base), construction industry (like formwork) and concrete block machine pallets etc. Our  GMT brick pallet made from this material can be as solid as reinforced concrete, because the fiber in the pallet is structured like reinforced concrete.In hence, the rigidity and toughness of the GMT pallet used for concrete block machines are particularly strong.

Technical Specifciation  

Items

Characteristics

Technical Specification

Outstanding Performance

1

Rigidity

Elasticity Modulas  3.7 GPa

No Deformation

2

High Load Bearing

Max load 2.0 kn,Bending Strength 51.0 MPa

Stand big pressure, high load, and brings no rupture

3

Anti-abrasion

Shore Hardness 72

Long Life Span

4

Anti-impact

Withstand Impact of 20KJ/m2

Vibration Resistant, Anti-fall, and no Cracking

5

Weather Resistant

Operating Temperature between -40 degree--90 degree

Insolation Resistant, Anti-aging, and Suit for Steam Curing

6

Erosion Resistant

Resistance of most Acid, Alkali, and Salt

Protect inner steel and bamboo against rust and mildew

7

No Water Immersion

Water Immersion Rate  <0.5%

Protect inner bamboo(wood) board

8

Light Weight

Density=1200kg/m3

Effort Saving and Friction Reducing

9

Life Span

Life Span can reach 6 years theoretically

Low Cost

10

High Performance

High Performance and Low Cost

Extremely Low Cost during long time using

Advantage :

- GMT Pallet more light weight, save the Sea freight cost

This glass fiber pallets for block is the most economical pallets currently now for block making machine. 

As we all know that PVC brick pallets for concrete block making machine is heavy. 

The density of PVC block pallet is 1750-1780kg/m3, while the weight of the fiberglass brick pallet is about 1200kg/m3. Therefore, if using PVC brick pallets, it will increase the transport cost.

For example,the Pallet for QT10-15 block making machine at 1100*950*28mm,the weight of PVC Pallet each pcs is 51.2kg, It means one 20ft container can load 527pcs(Max 27000kg per 20ft container);

While for GMT Pallet, the weight at 35kg with the same dimension at  1100*950*28mm,it means one 20ft container can load 768pcs per 20ft container.

  Container shipment of GMT Pallet for customer overseas

 

- Endurable

GMT pallet can use min. 6 years,which is much longer than Bamboo Pallet at 2 years and Wooden Pallet at 2-3 years.

- Impact Resistance

GMT brick pallet impact strength is equal to 30KJ/m2, while PVC block plate impact strength is less than or equal to 15KJ/m2, when comparing the impact strength under the same conditions. Drop hammer experiment test in the same height shows that: when GMT block pallet is slightly cracked, the PVC plate has been breakdown by drop hammer.

 

Tags

Leave your messages

Send Inquiry Now

Related Products