About the maintenance of the forklift battery
Traction battery for electric forklifts, also known as forklift battery, as a forklift driver, must follow the correct operating rules, safe use, keep in mind the following basic ten points:
1. The battery will generate hydrogen gas, which may cause an explosion. It is strictly forbidden to smoke near the battery. Any flame or spark is strictly prohibited. Always store the battery in a well-ventilated place when storing or charging, but do not use it at the air outlet to avoid corrosion caused by acid mist.
2. The battery liquid contains corrosive liquid, which may cause severe burns. Avoid contact with skin, eyes or clothes. If accidents occur, please rinse with plenty of water immediately and seek medical attention.
3. When inspecting or servicing the battery, use rubber gloves to avoid electric shock.
4. Always keep the battery surface or connections clean. Dust, impurities, etc. must be cleaned with a damp cloth, otherwise it will leak electricity or even cause a fire.
5. When cleaning the battery, be sure to use a damp cloth, not a dry cloth.
6. Do not connect tools between the positive and negative terminals of the battery.
7. When charging, the temperature of the electrolyte should not exceed 50 degrees Celsius to avoid damage caused by electrolyte overflow. Pay special attention during the summer day.
8. Before removing the battery plug, in order to avoid sparks, be sure to turn off the forklift's key switch and charger switch.
9. The electrolyte surface should not be lower than the lower limit, otherwise the battery is hot and easy to burn.
10. Children are not close.
GS Forklift ,which established in 1996. We have total 3 production base in China and 2 oversea co-venture factories with total over 2000 employees.We are professional and leading forklift manufacturer in China and we specialize on provding various kind of Material Handling Equipment,Warehouse Equipment,Ground Support Equipment,Industrial Cleaning Equipment,Aerial Work Platform,Architecture Decoration Materials and Spare Parts etc. Our products have been exported to over 130 different countries. We have the CE certificate for European market and EPA certificate for North American market.Covering an area of 100,000 square meters, GS have the advanced parts processing center, robot welding equipment, parts automatic hoist conveyor line, coating line, assembly line, forklifts performance test line, parts pre-test-bed and advanced ERP information management system,which all guarantee our products' high quality and best performance.GS Forklift's mission is to provide the Global Lift Solution. Let's grow together!