The efficiency, life and safety of the(full / half) electric high weight vehicle depend on the daily maintenance. Repair of(full / half) electric reactor vehicles and replacement spare parts shall be provided by the Company to ensure quality. It is recommended to contact our after-sales service department. In order to make your(full / half) electric reactor more safe and economical to operate. Here we mainly in these aspects to do some explanations: the safety and regulations of the maintenance work, the maintenance of the motor, the maintenance of the motor. Safety rules for maintenance work can only be performed after systematic learning. (1) Maintain the cleanliness of the maintenance site. (2) When repairing, do not bring loose articles or valuables on your body. Repair(full / half) electric reactor electrical system if the metal is exposed to electric electronic components easily causing short circuit or combustion. So please take off your watch, earrings or other accessories. (3) Unplug the power socket and disconnect the power supply before maintenance of the(full / half) electric reactor. (4) Before opening the left and right box covers or the electrical system, the key switch of the(full/half) electric stack shall be turned off. (5) Before checking the hydraulic system, the fork shall be lowered to release the system pressure. (6) When checking the oil leakage condition of the car body, please wipe it with paper or cardboard. Do not touch it directly with your hands. In case you get burned. (7) Please note that the oil temperature may be higher in the transmission or hydraulic system. After cooling the(full/half) electric reactor, the gear oil or hydraulic oil should be replaced to prevent the oil temperature from burning. all terrain pallet truck(8) The hydraulic system shall be filled with new cleaning oil. If the hydraulic fluid is not clean, it will affect the precision hydraulic components and reduce the capacity of the entire hydraulic system. If different brands of hydraulic oil are used, there is damage to hydraulic components and it also affects system capabilities. Therefore, when adding or replacing hydraulic fluids, pay attention to the use of a unified brand. (9) Please comply with relevant laws and regulations, protect the environment, store and discharge oil according to regulations, and do not discharge it into sewage pipelines. (10) Welding of the body, to disconnect the battery power. Because welding current may enter the battery during welding, in order to avoid this situation, please cut off the battery. (11) When working under the(full / half) electric reactor, the(full / half) electric reactor should be supported by a bracket.